Roland E-A7 编曲键盘操作系统安装方法 - 本站翻译！

155200530

最新V1.0.4版本系统下载地址：Roland E-A7 编曲键盘最新 Ver.1.04 操作系统（2016年1月上传）

检测您 E-A7 的系统版本

请在更新之前，检测您 E-A7 当前的系统版本。

• 按 [ Menu ] 调用菜单屏幕。
• 按 P2 (右侧屏幕)。
• 按 Utility (左侧屏幕)。
• 按 Version (左侧屏幕)。
  

屏幕将出现版本信息！

* 如果您的系统已经更新为最新版本的话，可不必更新。

目前最新 1.0.4 版本系统更新内容

[ Ver.1.04 ]
添加的新功能

• Sync Start for Pad was added to the Assignable Switch and Control Panel (SW) parameters.
• Several Tone Edit and Drum Kit Edit parameters were added.
• A shortcut to the Melody Intelligent settings screen was added to the Option screen on the right.
• Fill recording for the Style Composer was improved to allow a Fill1=2=3=4 settings.
• The mode settings for Track Edit in the Style Composer were improved to allow selecting All.
  

功能改进

• The system was modified so that Scale Tune is not applied when a Drum Kit is used in an ACC part.
• The system was modified so that no transposition is done when a Drum Kit is selected in a keyboard part.
• The system was modified so that the default value of the Balance knob is changed from -4 to 0 when adjusting the balance of a keyboard part and style/song part.
  

修复漏洞
The following bugs were fixed.

• Behavior sometimes becomes erratic when Track Edit in the Style Composer is executed during style playback.
• When playing a sustained Drum Kit instrument, the sound sometimes does not stop when the Kit is changed.
• Sound drop-out or sluggishness sometimes occurs when a Style is switched during a performance.
• Displaying the Track Mute screen results in delayed screen switching.
• Operation sometimes becomes sluggish when Style Lock or Tempo Lock is set and the UPG is switched.
• Inability to change SMF tone, EQ, etc., using Makeup Tools.
  

系统更新方法：
重要通知：更新过程中，请不要关机！！

• 将 U 盘连接到您电脑的 USB 连接端口。
• 将解压后的更新文件复制到 U 盘的根目录下。
  * 请不要复制“e_a7_sys_v104”文件夹，而复制内部的文件。
• 按照如下步骤从你的电脑断开 U 盘的连接。
  
  [ Windows ] 系统
  在Windows任务中使用安全删除硬件图标推出USB闪存盘，然后拔掉 U 盘。
  
  [ Mac ] 系统
  将 USB 闪存驱动器的图标拖到垃圾站。然后从你的电脑删除 USB 闪存。
• 确保 E-A7 处于关闭状态，然后将 USB闪存设备连接到键盘的 USB MEMORY 端口。
• 保持按住 [ TAP ] 按钮的同时打开乐器的电源。
• 当屏幕出现 \"Update Mode:\" / 更新模式 时候，放开按住的按钮。
  此时更新将会开始！
  * 更新过程需要几分钟才能完成。一定不会操作完成之前关掉电源。
• When the message \"SUCCESS\" is displayed, the operation has finished. (You will take about 5 minutes to update.)
• 当屏幕显示 “SUCCESS” / 成功时，表示更新操作完成(你需要大约5分钟更新)。关掉电源。断开USB闪存,然后打开单位的权力,并验证版本已经更新。
• 关闭乐器电源。
• 在键盘上拔掉 U 盘。然后重新开机，检测系统版本是否已经更新。
  

以上信息有本站独家编译！如需转载，请注明中国电子琴信息网！

defgas

好东西！先收藏了再说。谢谢！

快乐的土豆

非常棒！感谢楼主的分享！谢谢啦！

NZS453

学习了解   只是在最近乐展感受了一下    效果不错   

444243408

刚到手就给更新到2.01了。琴的操作比以前的gw8和bk5强太多了。

wx_uB46fN24

关掉电源后，拔掉U盘。在哪里打开单位的权利？请教是在哪里操作这个步奏？？